Skip to main content
All CollectionsFirmware Help
Installing BiXBiT USA Firmware
Installing BiXBiT USA Firmware

How to install BiXBiT USA firmware using Whatsminer Tools.

R
Written by Robert Fiesler
Updated over a week ago

Download BiXBiT USA Firmware at the following Link:

The same firmware file you downloaded works on all M2x, M3x, M5x machines

Download Whatsminer Tools at the following link:

(Note: only available on Windows computers)

How To Install BiXBiT USA Firmware

Step 1: Open Whatsminer Tools.

Step2: Click on Miner IP.

Step 3: Input your IP Range and select it. (1).

Then select OK. (2)

Step 4: Click on the miner or miners you want to upgrade.

Step 5: Select upgrade.

Step 6: Click on Select File.

Step 7: Go to where you have the BiXBiT USA Firmware saved on your computer.

Select the file (1) and then click open (2).

Step 8: Click on the Start Upgrade button.

Step 9: If you get this screen, click yes.

Step 10: you will see the file "Transferring" in the status column.

Step 11: You will see that the miner is "Upgrading" in the status column.

Step 12: Success, Miner has been updated with BiXBit USA firmware, and you are ready to start using it.

Did this answer your question?